Reset Burner Working Hours And Ignition Count - Watts AERCO EXT Installation, Operation & Maintenance Manual

Ufly Controller and BCM for Modulex EXT
CHAPTER 3: OPERATION, MENU & PARAMETERS
3. Click on the Request +/- buttons to set the manual setpoint desired.
4. To disable the Manual Setpoint Function, select the Home button

3.5.3 Reset Burner Working Hours and Ignition Count

Select one of the available burners
Click the Reset button. Password will be required to proceed.
OMM-0159_A_A • 6/28/2022 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
.
Page 20 of 83