Table of Contents
Advertisement
28 - Install the pedals
Apply a small amount of grease to the threads on each pedal,
marked Left and Right.
30 - Install the seat
Apply a modest amount of grease to the inside of the
seat tube.
29
With the right pedal, start threading the pedal bolt into the
crank arm. Once initially threaded you can backpedal while
holding the pedal bolt in place.
The left pedal has a reverse thread so you will need to turn
the pedal bolt counter clockwise to tighten it.
Use a 15 mm pedal wrench to tighten the pedals.
31
Lower your seatpost into your desired position and tighten
the collar with a 5 mm Allen wrench.
9
Advertisement
Table of Contents
