Table of Contents
Advertisement
16
Rest the back of the kickstand mounting plate on the
mounting shelf and use a 3 mm Allen wrench to thread the
M5 set screw in order to hold the kickstand in place.
18
Place the second U-Bolt on the non-drive side and position
the small mounting mounting plate in place on the forward
threads. Secure it with an M6 washer and nut.
Secure the other end of the U-bolt with the remaining M6
washer and nut.
17
Install the first U-bolt on the drive side of the bike. Fit an
M6 washer and nut onto the forward threads, until just
finger-tight.
Place another washer and nut on the other end of the U-bolt,
and secure both nuts with a 10 mm socket tool, being
mindful to tighten each end of the U-bolt evenly.
19
Go back to all four nuts and tighten everything with the
10 mm socket tool.
6
Advertisement
Table of Contents
