Table of Contents
Advertisement
28 - Adjust the front light
Use a 4 mm Allen wrench to loosen the bolt on the fender tab
and rotate the light into a vertical position.
30 - Install the pedals
Apply a small amount of grease to the threads on each pedal,
marked Left and Right.
29
Loosen the two pivot bolts to adjust the angle of the light, as
needed. Retighten all bolts.
31
With the right pedal, start threading the pedal bolt into the
crank arm. Once initially threaded you can backpedal while
holding the pedal bolt in place.
The left pedal has a reverse thread so you will need to turn
the pedal bolt counter clockwise to tighten it.
Use a 15 mm pedal wrench to tighten the pedals.
9
Advertisement
Table of Contents
