Advertisement
Install Handlebar
6
Adjust the Headset
7A
Tension the headset bolt to adjust the headset. You
may now release the zip-tie or toe-strap that was
holding the fork.
• Remove the faceplate with
integrated light mount from
the stem, and install the
handlebars so that the ends
of the bars will lie parallel to
the ground. Torque the stem
faceplate bolts to 6nM.
• Angle the shifter/brake lever
down 45 degrees.
7B
Tighten the stem clamp bolts to 6nM to lock in the
adjustment.
Advertisement
