Run Time Indication; Actual Run Timer - Thermo Scientific Sorvall WX100 Plus Instruction Manual

Run time indication

Select either the elapsed time or remaining time as run time�
Note that when the run time setting is set to [HOLD], elapsed time is automatically selected�
1� [Elapsed] button:
Elapsed time is displayed in the centrifuge run time indication field in the Run screen and "Lapse" is indicated to the right
above the display field�
2� [Remaining] button:
Remaining time is displayed in the centrifuge run time indication field in the Run screen and "Remain" is indicated to the right
above the display field�
Press to select either the [Elapsed] or the [Remaining]� Make certain that the selected button is surrounded by a red frame before
pressing the [X] button or ADMIN tab to store the setting�

Actual run timer

You can set the run time to start counting down either when the [START] button is pressed or when the set speed is
obtained�
1� [Enable] button: Run time is counted down when the set speed is obtained�
2� [Disable] button: Run time is counted down immediately after the [START] button is pressed�
Press to select either the [Enable] or the [Disable]� Make certain that the selected button is surrounded by a red frame before pressing
the [X] button or ADMIN tab to store the setting�
Figure 28: Set run time indication screen
Figure 29: Actual run timer setting screen
118