Status Display (Led Indicator) Lamp Setting - Thermo Scientific Sorvall WX100 Plus Instruction Manual

Status display (LED indicator) lamp setting

Sets the display color, brightness and lighting pattern of the status display lamp (LED indicator) beside the rotor
chamber door to indicate instrument operating conditions�
The display color, brightness and display pattern of the status display lamp can be set for the operating conditions described below�
Set as required for each operating environment�
1� Available display colors, brightness and display patterns
ƒ Display color: The following 8 selections, which include 7 colors (blue, red, green, light blue, yellow, white, pink) and the lamp
off setting
Brightness: 3 levels
ƒ
Lamp display patterns: A total of four patterns: steady lighting, rapid blinking, slow blinking, fade (a gradual and repeated
ƒ
dimming)
2� Available operating conditions and factory defaults
Available operating conditions
1 When stopped
2 During acceleration
3 When stabilized
4 During deceleration
5 During evacuation
6 Economy mode
7 When accelerating to zonal speed (normally 3,000 rpm)
8 When decelerating from zonal speed
9 When an alert occurs
3� Method for setting display colors for status display lamp
Step Touchscreen operation
1 Press the [LED] button�
Thermo Scientific Sorvall WX+ Ultracentrifuge
Factory defaults
Display color
blue
blue
blue
red
blue
green
blue
blue
red
Instrument operations and notes
ƒ The LED indicator setting screen appears�
100
Display pattern Brightness
Steady lighting
Slow blinking
Slow blinking
Slow blinking
Intermediate
Slow blinking
Steady lighting
Slow blinking
Slow blinking
Rapid blinking
[Set display
color] button