Texas Instruments CDCE906 User Manual page 25

IMPORTANT: TI is providing the enclosed CDCE906/CDCE706 evaluation module under the following conditions:
This evaluation module (EVM) being provided by Texas Instruments (TI) is intended for use for ENGINEERING DEVELOPMENT OR
EVALUATION PURPOSES ONLY and is not considered by Texas Instruments to be fit for commercial use. As such, this EVM may not be
complete in terms of design and/or manufacturing related protective considerations including product safety measures typically found in the
end-product incorporating the module. As a prototype, this product does not fall within the scope of the European Union Directive on
electromagnetic compatibility and on low voltage and therefore may not meet the technical requirements of the directive. This EVM is not
subject to the EU marking requirements.
• Should this EVM not meet the specifications indicated in the User's Guide the EVM may be returned within 30 days from the
date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY TI AND IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
• The user assumes all responsibility and liability for proper and safe handling of the EVM. The user acknowledge that the use of the
EVM could present serious hazards and that it is the user's responsibility to take all precautions for the handling and use of the EVMs
in accordance with good laboratory practices. Please be aware that the products received may not be regulatory compliant or agency
certified (FCC, UL, etc.). Due to the open construction of the product, it is the user's responsibility to take any and all appropriate
precautions with regard to electrostatic discharge.
• NEITHER PARTY WILL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES.
• TI is currently dealing with various customers for products, and therefore our arrangement with the user will not be exclusive.
• TI assumes no liability for applications assistance, customer product design, software performance, or infringement of
patents or services described herein.
• Please read the User's Guide and specifically the section in the User's Guide pertaining to warnings and restrictions prior to handling
the product. This section contains important information regarding high temperature and voltages which TI recommends to be read
before handling the EVMs. In case of any doubt regarding safety, please contact the TI application engineer.
• Persons handling the product should have electronics training and observe good laboratory practice standards.
• No license is granted under any patent right or other intellectual property right of TI covering or relating to any combination, machine,
or process in which such TI products or services might be or are used.
• This Agreement is subject to the laws of the State of Texas, excluding the body of conflicts of laws and the United Nations Convention
on the International Sale of Goods, and will be subject to the exclusive jurisdiction of the courts of the State of Texas.
EVM IMPORTANT NOTICE (CATEGORY B)