Table of Contents
Advertisement
www.ti.com
4
TI Pro-Clock™
TI Pro-Clock™ is the evaluation software for the CDCE906 and the CDCE706. The software contains the
CDCE906-706 SMBus Interface and the CDCE906-706 Programming Assistant. In the future, the software
will be expanded for new devices. The software runs under Windows 2000, XP, and XP*64. A quick
installation is required prior to use. See Section 4.4 Software Installation.
The CDCE906-706 SMBus Interface allows the user direct access to all programmable features of the
CDCE906/CDCE706 via the parallel port of the PC.
The CDCE906-706 Programming Assistant helps the user to find a proper device setup by choosing the
input and output settings.
4.1
CDCE906-706 SMBus Interface
The SMBus Interface is an easy-to-use programming environment and supports many features. It provides
direct access to the register and the EEPROM of the CDCE906/CDCE706 and therefore makes evaluation
easy.
4.1.1
Quick Start Instructions
The following steps are necessary for device programming after TI Pro-Clock™ has been installed on your
PC:
1. Power up the CDCE706/CDCE906EVM.
2. Connect the EVM and the PC with a parallel cable.
3. Start the TI Pro-Clock™ software.
4. Click the button CDCE906/CDCE706.
5. Make a user-defined setup.
6. Click the write register button.
SCAU016B – August 2006 – Revised August 2007
Submit Documentation Feedback
Figure 4. CDCE906-706 SMBus Interface
CDCE906/CDCE706 Performance Evaluation Module
TI Pro-Clock™
11
Advertisement
Table of Contents
