Walk Test; Led Indicator - Optex INS-HX-80N Installation Instructions Manual

4-5. Walk test

Set the LED switch to "ON" , then close the PIR cover.
1
3
Return the LED switch to "OFF"
after the walk test, if necessary.

4-6. LED indicator

LED
[1] Warm-up
[2] Alarm
Walk in the detection area, and confirm the LED
2
indication according to the movement.
Caution
For the walk test, walk at least 1.0 m (3' 3" ) away from the detector.
NOTE
Conduct a walk test at least once a year.
Seconds
60
2
- 11 -
Detection area settings and walk test
Step
4