Working From The System Settings Screen; Setting The Clock; Printing Chromatograms; Enabling Enhanced Detection Limit (Edl) Analysis Mode - Ametek ta7000R User Manual

Working From the System Settings Screen

The first Page screen (System Settings screen, Figure 3-4) is for general con-
figuration settings.

Setting the Clock

This screen allows you to set the ta7000R Time and Date. Use the Up/Down
*
arrow keys to select Clock, then press the Edit key. Move the cursor ( '
' ) to
the first number and use the Up/Down arrow keys to make changes. The time
format is DD-MMM-YY HH:MM:SS, where:
- DD is the numeric day
- MMM is the first three letters of the month
- YY is the last two digits of the year
- HH is the hour in 24 hour time format
- MM is the minute
- SS is the seconds
When finished press the Esc key and the time will be set.

Printing Chromatograms

Select this feature to print chromatograms after each run. Use the Up/Down
arrow keys to select Print Chromatograms and then press the Toggle key to
toggle this feature On/Off (enabled/disabled).

Enabling Enhanced Detection Limit (EDL) Analysis Mode

Using the Enhanced Detection Limit mode will help eliminate noise that oc-
curs from run-to-run. This parameter will toggle Enhanced Detection Limit
mode On/Off. Use the arrow keys select EDL mode and then press the Toggle
key to toggle the mode On/Off. EDL mode averages the last eight (8) samples
point-by-point to get an average sample and chromatogram.

Printing Diagnostic Information

The Diagnostic Print key appears when setting the clock. Press the Print key
from this page to print a complete report of all system settings, calibration set-
tings, temperatures and status, and the chromatogram from the last run of the
ta7000R. This is a system diagnostic tool which can be used to troubleshoot
problems with the ta7000R.
3-6 | ta7000R Gas Purity Monitor PN T900-013, Rev A