Table of Contents
Advertisement
Working From the Page Screens
From the Main Menu, press the Page key to view the System Settings screen
(Figure 3-4). Press Page again to view the Temperatures & Status screen, and
again to the view the Calibration Settings page. Pages that allow changes
will show a cursor ( '
to select the different parameters. An Edit command will appear if there are
parameters that can be changed.
Some parameter lists have a selection of pre-programmed settings that you
can select from. When viewing parameters that have pre-programmed set-
tings, a Toggle key will appear (in place of Print in Figure 3-4). For example,
move the cursor ( '
appear. Press the Toggle key to toggle between the enabled (
the disabled (
Each screen and its parameters are described in the following pages.
(Clock Setting selected)
'Print' command will change to 'Toggle'
when the cursor is moved to
'Print Chromatograms' or 'EDL mode'
Arrow keys, use to move
Cursor to select parameters
Figure 3-4.
System Settings screen.
PN T900-013, Rev A
*
' ) and the Up/Down arrow keys will be available to use
*
' ) to select Print Chromatograms and the Toggle key will
is not shown).
Idle Mode
*
Cursor – asterisk, '
'
Function enabled
('
' is displayed)
-------------------- System Errors --------------------
System Settings
Clock: 10-Jan-03
12:34:25
*
Print Chromatograms:
EDL mode:
Edit
User Interface
is shown) or
12:34:25
Ver. 2.70
+
+
Print
Page
|
3-5
Advertisement
Table of Contents
