Connecting to a Printer
If printouts of data are required, connect a communication cable between the
computer and the Parallel Printer port on the ta7000R Rear Panel.
The Parallel Printer Port (LPT1) uses a standard 25-pin female D-type connec-
tor. The Printer Port follows standard parallel printer protocols. The ta7000R is
compatible with Hewlett Packard printers, model numbers HP-6xx, HP-7xx ,
and HP-8xx. AMETEK recommends using one of these suggested models.
Figure 2-5.
Parallel printer port LPT1.
2-14 | ta7000R Gas Purity Monitor
DB 25 Male
14 15 16 17 18 19 20 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12 13
PN T900-013, Rev A