Working From The Run Mode Screen - Ametek ta7000R User Manual

Working From the Run Mode Screen

After the ta7000R has warmed up to normal operating temperature, press the
Run key to view the Main Menu screen. The upper-left corner of the screen
will display "Idle Mode" to indicate the ta7000R is not measuring or perform-
ing any other actions.
Figure 2-7.3.
Main Menu screen.
Next, to initiate automatic operation of the ta7000R, press the Run key again.
The upper-left corner of the screen will change to display "Run Mode" to indi-
cate the ta7000R is now performing a Cycle Run. "Idle" is now displayed in the
lower-left corner of the screen (Figure 2-8.1).
Figure 2-8.1.
Run Mode screen.
The ta7000R will display the time left (in seconds) for the current cycle in the
Status Bar, next to Run Mode (Figure 2-8.2).At the end of each cycle the re-
sults will be updated and displayed in the Main Window (Figure 2-8.1).
PN T900-013, Rev A
Idle Mode
=
H
2
CO =
Run Cool Calib
Run Mode 235
Cycle Run
= 16.1
H
2
CO = 12.7
Idle
Installation and Start-Up
12:34:25
Blank Page
12:55:30
Page
|
2-17