Setting The E-Wand Favorite Position; Quick User Guide; Operation Of A Single E-Wand; Controlling A Group Of Blinds - Current E-WAND Installation Manual And User's Manual

24. Setting the E-Wand favorite position

The FAVORITE Button allows the user to send the E-Wand to a uniquely
programmed position. Each E-Wand can have its own "favorite" position
where it will move to when triggered by that button on the remote.
1. Select Desired Favorite Position
Twist the E-Wand until the desired
"favorite" position is reached [Fig. 24.1].
2. Learn Favorite Position
Press and hold the PROGRAMMING
BUTTON on the E-Wand until you hear
a TRIPLE BEEP (3), then release. [Fig.
24.2].
Your FAVORITE Button on the remote control will now move that blind to
the programmed favorite position. Each E-Wand can be set to have different
favorite positions.
Figure 24.1; Twist Blinds to "favorite"
Position
Figure 24.2; Press and Hold
Programming Button
46

QUICK USER GUIDE

After the initial programming, simply twist the TWIST HANDLE of the

25. Operation of a Single E-Wand

ungrouped E-Wand to move your blind to the desired slat position and
release.
Once a group is created, you can twist any E-Wand in the group and release

26. Controlling a Group of Blinds

at the desired position. All other blinds in the group will automatically move
to the selected position.
27. Operation of a Single E-Wand Within a
Group of Blinds
Once a group has been set, twisting any E-Wand TWIST HANDLE will control
the entire group. To operate a single E-Wand within a group, quickly press
and release the PROGRAMMING BUTTON without triggering a beep, then
twist the TWIST HANDLE until the blinds reach the desired position.
If you accidentally trigger a beep, release the programming button, then press
and release the programming button again without triggering a beep to get
out of pairing mode.
47