Optional Programming Of The E-Wand; E-Wand Programming Beeps; What Is A Twist Group; Setting Up A Twist Group - Current E-WAND Installation Manual And User's Manual

Optional PROGRAMMING
of THE E-Wand
For further assistance during the programming process, please view our
online instructional videos at myewand.com/support.
During programming, be conscious that there are several series of beeps that

11. E-Wand Programming Beeps

correspond with the different programming stages. Be careful to not sum up
the number of beeps you have heard, for example, a SINGLE BEEP (1) and
then a DOUBLE BEEP (2) is not a TRIPLE BEEP (3).
Single Beep (1) Pairing Mode for the Remote and Grouping
Double Beep (2) Programming the Slat Positions Mode
Triple Beep (3) Setting the Favorite Position
Quadruple Beep (4) Setting the Preferred Closed Position
Quintuple Beep (5) Master Reset
Sextuple Beep (6) Realign the E-Wand
34

12. WHat is A TWIST GROUP?

While you may create a Twist Group prior to installation and programming,
we recommend grouping E-Wands AFTER installation to be sure of signal
strength. If installing E-Wands on challenging to reach blinds, group prior to
installation.
A Twist Group allows you to group multiple E-Wands together so each will
respond to the manual twist movement given to any other E-Wand you have
placed in the group.
Older, FM only E-Wands CAN be grouped to these Zigbee Hybrid E-Wands as
long as the Zigbee E-Wand is the twist group Master. Zigbee E-Wands will
have a blue O-Ring around the battery cap.
Note: FM E-Wands will respond to commands sent to Zigbee E-Wands from
app or voice commands.

13. Setting Up a Twist Group

1. Place all the E-Wands you wish to group in Pairing Mode
On the E-Wands you wish to group
together, one by one, press and hold the
PROGRAMMING BUTTON until you hear
a SINGLE BEEP (1), then release [Fig.
13.1].
Figure 13.1; Press and Hold
Programming Button
35