Current E-WAND Installation Manual And User's Manual page 15

3a. (optional) Add a New Hub to an Existing Account
If you had previously set up your account and are adding your first or a
seconary bridge, hit the "bridge" icon at the top of the Dashboard. [Fig. 7.3].
On the next page hit the plus (+) icon at the top right [Fig. 7.4].
Beach House
3b. Connect Bridge to Account
Figure 7.3; Hit the Bridge Icon
After setting up your account on the
app (or performing step 3a), follow the
steps in the app. After inputting bridge
information, it will prompt you to enable
the Bluetooth on the bridge. The app will
ask you to press and release the recessed
button on the bottom of the bridge [Fig.
7.5]. The LED lights will turn solid blue
and solid red.
During the set up process, the app will
ask you to scan the QR code located on
the bottom of the bridge [Fig. 7.6]. Scan
the code when prompted. The LED will
turn solid green to reflect that the bridge
is being connected to your account.
Your bridge is now connected to your
account.
Beach House
Figure 7.4; Hit the Plus (+) Icon
Figure 7.5; Press and release the
recessed button
Figure 7.6; Scan the QR Code on the
bottom of the bridge
28
4. Pair and Add Devices
In the app under devices, hit the + sign
[Fig. 7.7].
On any E-Wand you wish to pair to the
bridge (you can add more than one
device at a time), press and release the
programming button 3 times (without
hearing a beep) [Fig. 7.8]. The E-Wand
will start beeping to indicate it is
searching for a network.
The E-Wand will play a confirmation beep
(Ode to Joy) when it has discovered the
network or a failure beep (Beethoven's
5th) if it did not find a network.
You will see the device pop up in the
menu on your Smart Phone screen.
Select the appropriate device, using the
"identify" button if needed [Fig. 7.9].
Once the device has been identified, hit
"register", then name the device.
If you would like to add any additional
devices, repeat step 4.
Once your devices have been added, use
the app to set up groups, scenes, and
schedules as desired.
Beach House
Figure 7.7; Hit the + to add a device
Figure 7.8; Press and release the
programming button quickly three times
E-Wand
Figure 7.9; Device will show up, hit
Register
29