Telnet Login; Commands; First Level Commands - Planet WSD-800 User Manual

3.4 Telnet login

The Switch also supports telnet for remote management. The Switch asks for user name and password for remote
login when using telnet, please use "admin" for username and "admin" for password.

3.5 Commands

There are two levels for console commands. The first level provides commands to show system informations and
current configurations. The second level (privileged mode) provides commands to set clear and show the
configuration.

3.5.1 First level commands

The follow table lists the first commands and the equivalent usages.
Command
enable
show channel
show console-info
show dow1x local-userInfo
show dot1x state
show igmp-snooping group number
show igmp-snooping group policy
show igmp-snooping info
show igmp-snooping policy deny
show ip http server
show ip telnet server
show ipstack info
show mirror
show multicast router
show port counter
show port dot1x
show port mac-learning
show port rate-shaping
show port rstp-extension
show port spantree
show port state
show port storm-limit
show qos map cos-queue-map
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
Description
Enable privileged mode
Show channel information
Show console-info
Show dot1x local user information
Show dot1x information
show igmp snooping group-limit
Show igmp snooping group policy
Show igmp snooping information
Show igmp snooping policy deny
Show http server information
Show telnet server information
Show ip stack information
Show mirror information
Show multicast router port information
Show port counter information
Show port dot1x information
Show MACs on certain port
Show port ingress and egress rate-shaping
Show port RSTP port role and protocol mode
Show spantree information on ports
Show port infomation
Show port storm limit mode and rate
Show qos map cos-queue-map
-19-