Planet WSD-800 User Manual page 65

8-port 10/100mbps + 1-2 gigabit tp/sfp combo managed ethernet switch
Hide thumbs Also See for WSD-800:
Table of Contents

Advertisement

• RADIUS Server IP
Address
• Authentication
Port(1-65535)
• Account
Port(1-65535)
• Share Key
3.
Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in
the default IP Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret
key is as same as the one you had set at the switch RADIUS server – 12345678 at this case.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
The IP address of the RADIUS server being added.
The UDP port used by this server. The valid range is 0 - 65535.
The default UDP Port No. is 1812
The UDP port used by accounting server. The valid range is 0 -
65535.
The default UDP Port No. is 1813
Indicates if the shared secret for this server has been
configured.
-65-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsd-910Wgsd-1022c

Table of Contents