Planet WSD-800 User Manual page 8

Switch Throughput
Switch Architecture
Address Table
Share data Buffer
Maximum Frame Size
Flow Control
LED
Console Interface
Power requirement
Power Consumption
Operating environment
Storage environment
Dimension (W x D x H)
Weight
Layer 2 function
Management Interface
Port configuration
Port Status
VLAN
Spanning Tree
Link Aggregation
QoS
IGMP Snooping
Bandwidth Control
Port Mirror
1.19Mpps 2.67Mpps
Store-and-Forward
8K entries
1Mbit
1522 Bytes packet
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Power, Link/Act and speed per port
One RS-232 DB-9 male connector for Switch management
110~240V AC, 50/60Hz
12.2 watts / 41BTU
0~50 Degree C, 5%~90%RH
-20~70 Degree C, 5%~90%RH
280 x 173 x 44 mm
1.24kg
Console, Telnet, Web Browser, SNMP v1 and v2c
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Display each port's speed duplex mode, link status, Flow control status. Auto
negotiation status, trunk status.
Port-Based VLAN, up to 49 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID,up to 255 VLAN groups
IEEE 802.1d, IEEE 802.1w
Supports 4 groups of 8-Port trunk support
Traffic classification based on Port Number, 802.1p priority, DS/TOS field
in IP Packet
v1 and v2
Allow to disable or enable.
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
RX/TX/Both
-8-
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
4.16Mpps