Planet WSD-800 User Manual page 63

Auto: enables 802.1X authentication and causes the port to begin in the unauthorized state, allowing only
。
EAPOL frames to be sent and received through the port. It's a default status
Force authorized: disables 802.1X authentication and causes the port to transition to the authorized state
。
without any authentication exchange required. The port transmits and receives normal traffic without
802.1X-based authentication of the client. This is the default setting.
Force unauthorized: causes the port to remain in the unauthorized state, ignoring all attempts by the client
。
to authenticate. The switch cannot provide authentication services to the client through the interface.
Maximum account number: the biggest user's quantity of passing authentication under this port, set 1，
。
Only one user can pass this authentication，The second user is unable to carry on authentication on this
port。The max value is 32
Current account number: show the current user who passed authentication under one port.
。
2. Enter"802.1X Local Authenticate" to set legitimate user information: In the local server model, the need
for each port through the establishment of the legitimate user authentication information available. As
Figure2-45
3. "Other configuration": only choose "Local Authenticate" mode is available. If you not have good
experiences please keep the default value.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-63-