Planet WSD-800 User Manual page 44

unless manually overridden through configuration.
The link type attached to this port could be selected as following:
Auto - The switch automatically determines if the interface is attached to a point-to-point link or to shared
。
media
True – A connection to exactly one other bridge.
。
False - A connection to two or more bridges.
。
Port Priority: Defines if this port is more or less likely to become the root port. The range is from 0 to 255, the
default setting is 128.The lower number has the highest priority.
Path Cost: Specifies the path cost of the port. The switch uses this parameter to help determine which port will
become a forwarding port. Lower numbers will be used as forwarding ports first. The range is from 0 to 65535. The
default values based on IEEE802.1D are: 10Mb/s = 50-600, 100Mb/s = 10-60, 1000Mb/s = 3-10
Port Mcheck set: If the port property is a rapid, because of received STP BPDU, then it change into STP
compatible mode, According to Mcheck setting, change property into RSTP mode.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-44-