Configure Sample:
1.
Select the Port field in the Set IGMP Port Policy Table, in this case, Port-2 be selected.
2.
Fill the accepted number in the Group Number field. ( For this case, 4 multicast groups are allowed)
3.
Click on the "OK" button to save.
4.
The worksatation that connect to Port-2 start to send IGMP Join/Report packets.
5.
Select "IGMP Snooping Configuration" page to show the Multicast Group Table.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-80-