Planet WSD-800 User Manual page 54

User's Manual of WSD-800 / WGSD-910/WGSD-1022C
5. Trunk configuration: If the Trunk type is chosen, please follow the steps to set the Trunk of the port.
5.1 Add and define the names and VIDs for new VLANs. The VID number ranges from 2 to 4094. Fill the VID field
and the VLAN Name field in the Set VLAN's VID & Name table and click on the "Add/Modify" button to save.
5.2 The added new VLAN then shows the the VLAN Table field in the Set Trunk Port for VLAN table.
5.3 Select on the VLAN chich you want to tag with in the VLAN Table field and click on the "Add" button to add.
This will add the VLAN in to the VLAN with The Trunk Port field.
5.4 Click on the "close" button to close the VLAN port configuration table of port #2, and back to the 802.1Q main
page.
5.5 Click on the "Show VLAN Members" button to show the VLAN members.
5.6 As shows in the following screen:
-54-