Planet WSD-800 User Manual page 53

The main page then changes to the 802.1Q VLAN table which displays the VLAN configuration of each port.
2. If you want to configure port #2 to be in a VLAN other than default VLAN. Double click on "port2" to enter into
VLAN port configuration window.
3. Choose the Link Type in the drop drop down menu: Access , Always Untag or Trunk.
Note that if the Access type is chosen, it will strip the 802.1Q tag from all packets that out of this port. On the
other hand, if the Trunk type is chosen, it will put the VID number, priority and other VLAN information into the
header of all packets that out of this port. And if the Always Untag type is chosen, it will strip the 802.1Q tag
from all packets that out of the port. But the port can be assigned to more than one VLAN group.
4. Define the PVID for the port
Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for
accommodating devices that you want to participate in the VLAN but that don't support tagging.
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-53-