Planet WSD-800 User Manual page 99

3. Move the mouse course to the port, which had be assigned to be connect to the server/AP/printer, then click
on the port. For this case, we set the Port-1 to be the multiple untagged port. The screen in Figure 7-3
appears.
4. At the Link Type, select "Always Untag" at the draw bar. Click "OK" to apply.
5. Click the "Add/Modify" button to create new VLAN groups with VID=2 and VID=3.
6. At the Port 1-VLAN Port configuration page, select VLAN 2 and VLAN 3 to add to the Port 1. The right
information window at this table shows the status. The screen in Figure 7-4 appears.
Figure 7-2 802.1Q VLAN page screen
Figure 7-3 802.1Q VLAN Port Configuration – Port1 screen
User's Manual of WSD-800 / WGSD-910/WGSD-1022C
-99-