Replacing The Optional Internal Usb Memory Key - Dell PowerEdge R630 Owner's Manual

Related references
System board jumpers and connectors

Replacing the optional internal USB memory key

1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
1. Locate the USB port or USB memory key on the system board.
To locate the USB port, see the System board jumpers and connectors section.
2. If installed, remove the USB memory key from the USB port.
Figure 45. Removing the internal USB memory key
a. USB memory key
b. USB port
3. Insert the replacement USB memory key into the USB port.
Figure 46. Installing the internal USB memory key
a. USB memory key
b. USB port
1. Follow the procedure listed in the After working inside your system section.
2. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Related concepts
System Setup
Related references
Safety instructions
System board jumpers and connectors
96 Installing and removing system components