Back Panel Features; Two-Riser Chassis - Dell PowerEdge R630 Owner's Manual

Related references
View menu
View menu
NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.
Option Description
iDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC8. Addresses include DNS (Primary and Secondary),
Gateway, IP, and Subnet (IPv6 does not have Subnet).
MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name Displays the name of the Host, Model, or User String for the system.
Number Displays the Asset tag or the Service tag for the system.
Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in the
Set home submenu of the Setup menu.
Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured in
the Set home submenu of the Setup menu.

Back panel features

The back panel provides access to the features available on the back of the server, such as the system identification button,
power supply sockets, cable management arm connectors, iDRAC storage media, NIC ports, and USB and VGA ports. A majority
of the expansion card ports can be accessed from the back panel. The hot swappable power supply units, and if installed, the
rear accessible hard drives are accessible from the back panel.

Two-riser chassis

NOTE: This is only applicable for eight x 2.5-inch hard drive chassis.
Figure 6. Back panel features (two PCIe expansion cards)
1. System identification button
3. iDRAC8 Enterprise port
5. Serial connector
7. USB ports (2)
9. Ethernet connectors (4)
11. Power supply unit (PSU2)
16 Dell PowerEdge R630 system overview
2. System identification connector
4. PCIe expansion card slot (riser 1)
6. Video connector
8. PCIe expansion card slot (riser 2)
10. Power supply unit (PSU1)