Power Menu - Energy Saving Functions; Power On Source - Management Of Switch-On Sources; Power On Source: Lan - Switch On Via Lan Controller - Fujitsu D2912 Bios Manual

Power Menu – Energy saving functions
Power Menu – Energy saving functions
Power
Power-on Source:
LAN:
Wake On LAN boot:
Wake Up Timer:
Wake Up Time:
Wake Up Mode:
Power Failure Recovery:
Low Power Soft Off:
Hibernate like Soft Off:
USB At Power-off:
USB Keyboard:
Example showing the Power menu
Power On Source – Management of switch-on sources
Specifies whether the switch-on sources for ACPI operating systems are managed
by the BIOS or the operating system.
The switch-on sources are managed by the BIOS.
BIOS
Controlled
The switch-on sources are managed by the ACPI operating system.
ACPI Controlled
Power On Source: LAN – Switch on via LAN controller
System power-on
Determines whether the system can be switched on via a LAN controller (on
the mainboard or additional board).
The system can be switched on via a LAN controller.
Enabled
The system cannot be switched on via a LAN controller.
Disabled
Wake On LAN Boot – Switching on over the network
Switch onsystem
Specifies the system behaviour when switched on by means of network signals.
The system boots up according to the device sequence specified in the Boot menu
Boot
when switched on via LAN.
Sequence
The system is booted remotely via LAN when switched on via LAN.
Force LAN
Boot
58
[BIOS Controlled]
[Enabled]
[Boot Sequence]
[Disabled]
[00.00.00]
[Daily]
[Previous State]
[Disabled]
[Disabled]
[Always Off]
[Disabled]
Item Specific Help
[BIOS Controlled]
Power-on sources
are controlled by BIOS
Also valid for ACPI
operating systems.
[ACPI Controlled]
Power-om source are
controlled by an ACPI
operating system.
Fujitsu Technology Solutions