Bios Setup With Incorrect Settings - Fujitsu D2912 Bios Manual

Navigating BIOS Setup

BIOS Setup with incorrect settings

System boot
If an incorrect setting in BIOS Setup prevents the system booting and the system cannot
be booted three times in a row, the default BIOS Setup settings will be applied once,
the next time the system is started. The following error message will appear:
Previous boot incomplete - Default configuration used
Pressing the
"Error messages", Page
from booting can now be corrected. This will allow the system to start without error again.
Example showing the BIOS Setup Main menu
1
Main
System Time:
System Date:
Diskette A
2
SATA Port 0
SATA Port 1
SATA Port 4
SATA Port 5
Boot Features
System Memory:
Extended Memory:
4
1 = Menu bar
2 = Working area
The BIOS Setup screen is divided into the following areas:
Menu bar (1):
Working area (2):
Help area (3):
Operations bar (4) The operations bar lists the keys available for use with BIOS Setup.
10
F2 allows you to check and correct the settings in BIOS Setup (see Chapter
55). Any incorrect BIOS Setup settings that prevented the system
The menu bar is used to select the different BIOS Setup menus.
The working area displays the setting options (fields) for the selected menu.
You can set the entries in the displayed fields according to your requirements.
► Indicates fields that open further submenus. You can change entries
in these submenus.
* Indicates configuration conflicts that must be resolved to ensure that the
device functions correctly.
Brief information on the selected field is displayed in the help area.
BIOSSetup
[10:01:23]
[11/11/2009]
[None]
[HL-DT-STXXH10N-(S0]
None
[ST350063]
None
631K
2999M
3 = Help area
4 = Operations bar
Item Specific Help
Selects floppy type.
Fujitsu Technology Solutions
3