Floppy Disk Controller; Usb Host Controller; Usb Bios Hot-Plug - Fujitsu D2912 Bios Manual

Floppy Disk Controller

Switches the mainboard control of the floppy disk drive on or off.
The floppy disk control is switched on - IRQ6 is occupied.
Enabled
The floppy disk control is switched off - IRQ6 is free.
Disabled

USB Host Controller

USBcontroller
Specifies whether the USB controller is switched on or switched off (Disabled). If this
function is switched off, the USB controller will not be recognised by any operating
system. As a result, no USB devices can be operated.
USB host controller is enabled.
Enabled
USB host controller is disabled.
Disabled
USB Devices
Defines the USB devices for which Legacy Support is available.
No USB Legacy Support.
None
USB Legacy Support only enabled for keyboard and mouse.
Keyboard
And Mouse
Only
USB Legacy Support enabled.
All
USB Ports
Configures USB ports according to device classes. Any disabled USB ports are
also not available under the operating system.
Disable Unused Ports
Disable Storage And HUB
Keyboard And Mouse Only
Enable all

USB BIOS Hot-Plug

Defines if newly connected USB devices at BIOS level are recognised during operation.
Disabled Newly connected USB devices at BIOS level are not recognised.
Newly connected USB devices at BIOS level are recognised.
Enabled
Fujitsu Technology Solutions
Advanced Menu – Advanced system configuration
All unused USB ports are disabled.
All ports with mass storage devices and HUBs will be disabled.
Only ports with keyboard and mouse will be enabled.
All USB ports are enabled.
21