Hd-Id; Boot Features - System Boot; Post Errors - Aborting System Boot; Sm Error Halt - Fujitsu D2912 Bios Manual

HD-ID

The hard disk ID number is displayed during POST and when the password is requested.
Boot Features – System boot
System boot Bootroutine
Opens the submenu used to select system boot settings for the device.
Boot Features
POST Errors:

SM Error Halt:

Fast Boot:
POST Diagnostic Screen:
Boot Menu:
POST Errors – Aborting system boot
Bootroutine System boot Self-test
Defines whether the system boot process is aborted and the system halted when an error is detected.
If the self-test detects an error, system boot is aborted after the self-test and the
Halt On All
system is halted. The system boot can be continued by pressing the F1 key.
Errors
System boot is not aborted. The error will be ignored, as far as possible.
No Halt On
Any Errors
SM Error Halt
Configures the system behaviour during the self-test if a system monitoring error is ascertained
by the System Monitoring Device (e.g. fan monitoring, temperature monitoring).
If the system monitoring device reports a fan error to BIOS, the system boot is
Enabled
cancelled and the system stopped after the self-test.
The system boot is not cancelled if the system monitoring device reports a
Disabled
miscellaneous error to BIOS. In this case, only an error message is displayed.
Fast Boot – Quick Self-test
can reduce the scope of the self-test and thus accelerate the start-up of the system.
When the device is switched on, the quick self-test is carried out, in which e.g. the
Enabled
floppy disk drives are not checked.
When the device is switched on the complete self-test is carried out.
Disabled
Fujitsu Technology Solutions
[Halt On All Errors]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
Main Menu – System functions
Item Specific Help
Pauses and displays
SETUP entry or resume
boot prompt if error
occurs on boot. If
disabled, system
always attempts to
boot
17