Advanced System Configuration; Display, Primary; Igd - Device 2 - Fujitsu D2912 Bios Manual

Advanced System Configuration
System settings,additional

Advanced System Configuration

Primary Display:

IGD - Device 2:

Pre - Allocated Memory Size: [32M]
IGD - Memory Size:
High Precision Event Timer: [Enabled]
SMART Device Monitoring:
SATA Mode Selection:
SATA Port 0:
SATA Port 1:
SATA Port 2:
SATA Port 3:
SATA Port 4:
SATA Port 5:
Example showing the Advanced System Configuration menu
Opens the submenu used to make additional system settings.

Display, primary

Display,primary
Specifies the picture source during the BIOS POST.
The Integrated Graphics Device (IGD) on the system board is used as the picture
IGD
source during the BIOS POST.
If it is inserted, the PCI Express graphics card serves as the picture source during
PEG
the BIOS POST.
If it is inserted, the PCI graphics card serves as the picture source during the BIOS
PCI
POST.
The first available picture source in the sequence PEG, PCI or IGD is used as the
Auto
picture source during the BIOS POST.
IGD – Device 2
Specifies whether the Integrated Graphics Device (IGD) is available.
The Integrated Graphics Device is not available.
Disabled
The Integrated Graphics Device is available. Use of the device depends on the
Auto
settings under "Primary Display" and any additional graphics card which may be
inserted.
Fujitsu Technology Solutions
Advanced Menu – Advanced system configuration
[Auto]
[Auto]
[MaxDVMT]
Auto
Enabled
[Enabled]
[AHCI]
[Internal]
[Internal]
[Internal]
[Internal]
[Internal]
[Internal]
Item Specific Help
Select 'IGD' to have
Internal Graphics,
if supported and
enabled, be used
for the boot
display device.
Select 'PEG' to have
PCI Express Graphics,
if supported and
enabled, be used
for the boot display
device.
23