Access Rights For The Smartcard - Fujitsu D2912 Bios Manual

Security Menu - Security features

Access rights for the SmartCard

SmartCard SmartCard SmartCard
New SmartCards initially only have a preset PIN and PUK. Access rights and an individual
PIN and PUK are not assigned until the SmartCard is initialised. The SmartCard type
depends on the access rights assigned to the card, as described below:
• User SmartCard – Start up system, change PIN
• Super User SmartCard – Start up system, make changes in BIOS Setup, change PIN
• Service SmartCard – Make changes in BIOS Setup
• Admin SmartCard – Start up system, make changes in BIOS Setup, change PIN,
uninstall SystemLock, initialise SmartCards, unblock SmartCards
The following table shows an overview of the rights granted with each type of
SmartCard type when a PIN or PUK is entered:
Start up system
Open BIOS Setup
Change own PIN
Unblock own blocked
SmartCard
Unblock all blocked
SmartCards
Generate user cards
Uninstall SystemLock
* BIOS Setup setting (Unblock own SmartCard)
Usually there is always an admin SmartCard and at least one User or Super User
SmartCard that will allow a system to be operated.
44
User
SmartCard
PIN PUK PIN
x x
x
x x
x*
Super User
SmartCard SmartCard
PUK PIN
x
x
x*
Service Admin
SmartCard
PUK PIN
x
x
x
x*
Fujitsu Technology Solutions
PUK
x
x
x
x
x