Ata Vulnerability Protection; Diskette Write - Write Protection For Floppy Disk Drive; Flash Write - System Bios Write Protection; Cabinet Monitoring - Protection After Opening The Case - Fujitsu D2912 Bios Manual

ATA Vulnerability Protection

Provides extended protection against access attempts to ATA hard disks.
This setting causes the hard disk to operate using the standard factory settings.
Standard
Standard settings should be selected before configuring the hard disk (e.g. hard
disk password, silent mode, SMART, ...).
The hard disk can be set to use a protected mode that modifies the
Enhanced
security-related functions so they are not identical to the original default settings.
Some special low-level hard disk configuration programs may not function if
this setting is selected.
The system must be restarted for any changes to take effect.
Diskette Write – Write protection for floppy disk drive
Floppy diskdrive Writeprotection
This field is used to enable and disable floppy disk write protection.
Diskettes can be read, written to or deleted if the appropriate option (see manual
Enabled
for the mainboard) is set accordingly.
Diskettes can only be read.
Disabled
Flash Write – System BIOS write protection
FlashBIOSupdate Writeprotection System BIOS,writeprotection
This field can assign write protection to the system BIOS.
The system BIOS can be written to or deleted if the corresponding switch (see
Enabled
manual for the mainboard) is set accordingly. Flash BIOS update is possible
The System BIOS can neither be written to nor deleted. Flash BIOS update is
Disabled
not possible
Cabinet Monitoring – Protection after
opening the case
You can only continue using the device after opening the casing by entering the setup
Enabled
password.
Disabled The device also continues working normally with the casing open. No password is
required.
Fujitsu Technology Solutions
Security Menu - Security features
57