Carrying Out Administrator Functions - Fujitsu D2912 Bios Manual

Carrying out administrator functions

If you have an internal SmartCard reader, you can also switch on the PC by inserting the
SmartCard. The following prompt will appear after starting the device:
Insert a SmartCard.
► Insert the Admin SmartCard. The following prompt will appear:
Enter PIN.
Select between the options shown:
F2=Setup, F3=Change PIN
► Press the F2
► From the Security menu, choose the option SmartCard SystemLock.
The SystemLock administration menu will be displayed:
Security
SmartCard SystemLock
SmartCard SystemLock
Uninstall:
BIOS Recovery:
SmartCard and Pin
SmartCard Initialization
Admin SmartCard
SuperUser SmartCard:
User SmartCard:
Service SmartCard:
SmartCard Configuration
Change PIN:
Change PUK:
Unblock SmartCard:
Additional SmartCards should be produced either as normal User SmartCards ("System")
or as extended User SmartCards ("System and Setup"). These cards will have restricted
access to the PC (see Chapter
► Select the required function. The following prompt will be displayed:
Remove your Admin Card.
Keep the Admin SmartCard in a safe place and protect it from unauthorised access.
► Remove the Admin SmartCard.
Insert a SmartCard.
Fujitsu Technology Solutions
function key to enter BIOS Setup.
"Uninstall SystemLock", Page
Installed
[Enter]
[Allowed]
[Always required]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
Security Menu - Security features
Item Specific Help
Allows to deactivate
The smartcard security.
ATTENTION:
Always check the BIOS
password settings after
uninstalling
SystemLock.
NOTICE:
Reinstalling a SinglePC
implies re-initializing
all of your smartcards
54).
51