Reset Configuration Data; Large Disk Access Mode - Hard Disk Access - Fujitsu D943 Technical Manual

Settings in BIOS Setup

Reset Configuration Data

This field specifies whether the configuration data is reset and reinitialized when
the PC is started.
When the PC is started the old configuration data is reset and the
Yes
entry in this field is set to NO. The new configuration data is
determined by means of the Plug&Play functionality. The mounted
modules and drives are then initialized with this data.
The Plug&Play functionality ascertains the current configuration
No
data and uses it to initialize the installed modules and drives. There
is no update when the system is started (default entry).

Large Disk Access Mode - Hard disk access

specifies the type of hard disk access for large hard disks (more than 1024
cylinders, 16 heads). The default setting depends on the operating system used.
the operating system uses MS-DOS-compatible hard disk accesses.
DOS
If the operating system uses hard disk accesses which are not MS-
Other
DOS-compatible (e.g. Novell, SCO Unix).
32
Advanced - advanced system configuration
A26361-D943-Z120-14-7619