General; Device Concept; Functional Principle; Application Areas - Fronius TransSteel 3500 Syn Operating Instructions Manual

General

Device concept

TransSteel 3500 / 5000 Syn
Functional prin-
The central control and regulation unit of the power source is coupled with a di-
ciple
gital signal processor. The central control and regulation unit and signal pro-
cessor control the entire welding process.
During the welding process, the actual data is measured continuously and the
device responds immediately to any changes. Control algorithms ensure that the
desired command values are kept.
This results in:
-
-
-
Application The devices are used in the commercial sector for manual and automated applic-
areas ations with classical steel and galvanised sheets:
-
-
-
-
-
-
-
Warning notices
Warning notices and safety symbols are affixed to the power source. These warn-
on the device ing notices and safety symbols must not be removed or painted over. They warn
against incorrect operation, as this may result in serious injury and damage.
a precise welding process,
a high degree of reproducibility of all results,
excellent weld properties.
Machine and equipment construction
Steelwork
Plant and container construction
Shipyards and the offshore industry
Metal and gantry construction
Rail vehicle construction
Metalworking trades
The TransSteel (TSt) 3500 Syn and TSt
5000 Syn power sources are fully di-
gitised, microprocessor-controlled in-
verter power sources.
The modular design and potential for
system add-ons ensure a high degree
of flexibility.
The devices are designed for the weld-
ing of steel and the following welding
processes:
- MAG welding
- MMA welding
The device has a "Power limitation"
safety feature. This means that the
power source can be operated at the
power limit without compromising pro-
cess safety. For more information, see
the "Welding mode" section.
21