Oms Standard And Oms Ble - Access Codes And Flashing Light Description - Assa Abloy SL500 User Manual

OMS Standard and OMS BLE - Access codes and flashing light description

Codes
One of four access codes can be used.
1 No access code.
The access is obtained by pushing any mode selection button for 2 seconds.
2
Once unlocked, it will stay unlocked if no button has been pushed for 5 seconds.
A passcode can be selected where the access is obtained by briefly pushing the buttons
in the correct order. The entire code must be entered within 10 seconds.
Default passcode is
3
Once unlocked, the unit will be locked 15 seconds after entering the passcode.
When selecting a new mode it must be confirmed by pressing
mode selector will be locked.
Note! The passcode can be changed by an authorized service technician.
Give access with an internal/built in key.
Once unlocked, the unit will be locked 15 seconds after activating the key.
4
When selecting a new mode it must be confirmed by pressing
mode selector will be locked.
The different operation modes are selected by pushing their respective symbol. If selected,
the symbol shines blue.
Flashing light
Red
Magenta
Yellow
Green
Bluetooth LED (For OMS BLE)
No light
Lit
Flashing light
1009216-en-21.0
A flashing red light is indicating an error in the operator. If the error remains
after a RESET then service is needed.
A magenta light every other second indicates a status or condition that can
be cleared by the owner e.g. a break-out door is broken out.
A yellow light every other second indicates that maintenance is needed.
A green light will flash whenever a button is pressed while typing the
passcode.
When correct passcode is entered, the green led is continuously lit.
A green light will flash four times per second when a new operation
mode has been selected but not yet confirmed.
Bluetooth is disabled
Bluetooth is active
OMS BLE module is paring with the app
ASSA ABLOY Sliding Door Manager
Issue 2021-11-19
, after which the
, after which the
13