PED4000 / PED5000 Series with M61
Alarmed Exit Devices
Installation Instructions
1
General Description
The M61 Alarmed Exit is designed for areas that require an alarm to sound upon exiting. Once armed, any push rail
movement will activate the horn in the push rail. The horn will continue to sound for two minutes and then shut
off automatically. The LED will fl ash indicating a violation has occurred.
Manual dogging is provided standard on
non fi re rated devices.
Notes:
•
Installation must be performed by a trained service person.
•
Basic installation is 9V alkaline battery operated. For hardwired option use 709F989 / 709F999 Wiring harness -
See instruction sheet included with kit.
•
Field cut rail assemblies are not allowed. Exit device must be ordered from the factory for specifi c door width.
Tools Needed
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1" diameter hole(s) required for routing wires
into the door when remote option(s) is used.
2
FM618 01/23