Advertisement
PED5400 Series (Standard, A, HC, & HC4)
Surface Vertical Rod Exit Device
Installation Instructions
Parts Description
Rod
silencer
Rod Guide
Bottom Rod
Silencer*
Bottom Case Cover*
*Not included with M55 option.
Note: Please refer to trim and other installation instructions provided in the box.
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Patent pending and/or patent www.assaabloydss.com/patents.
Top Case
Top Cover
Mounting Plate
Top Rod
Push Rail Assembly
Chassis
Chassis Cover
Bottom Rod
Bottom Rod Guide*
Bottom Case
Standard PED5400 Exit Shown
End Cap
"Lock Down Key"
To operate: Depress push rail; Insert hex key, and
turn counter clockwise. Not for use with fire rated
devices.
Cylinder Dogging M52 Option
(Exploded View For Clarity)
Slide mounting rail insert with cylinder
dogging M52 option into mounting rail.
The surface of the door where the exit device is to be
applied must be flush. Clear away any raised projections
to allow exit device to rest on the flat surface of the door. If
shim kit is required, contact your distributor.
5
FM583 1/23
Advertisement
