Change Hands; 1/4-20 Sex Nut Option; Rod Extension Options - Assa Abloy Corbin Russwin ED5400 (A) Series Installation Instructions Manual

Surface Vertical Rod
Exit Devices
Installation Instructions
1 General Information (cont .)
a

Change Hands

Remove four (4) screws and
vertical lifter assembly. Rotate
device to opposite hand (180˚).
Insert lifter assembly under
lift block and re-install screws.
Note
Lifter must fit under lift block as
shown. (Figure 4)
b

1/4-20 Sex Nut Option

Recommended for wood composite or unreinforced metal doors. (Figure 5)
Device
No trim
With trim
c

Rod Extension Options

Figure 6
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2013, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
(4) 8-32 x 3/16" PRHMS
Quantity Size
8
1/4 - 20
6
• 2" (51 mm)
• 6" (152 mm)
• 12" (305 mm)
• 24" (610 mm)
• (Specify device finish)
RHR Device
Lift block
Vertical lifter
assembly
RHR Door
Figure 4
5
LHR Device
Vertical lifter
assembly
(4) 8-32 x 3/16" PRHMS
LHR Door
Note
Standard for Fire
Rated doors.
Figure 5
FM164 09/19