Table of Contents
Advertisement
CPX4 AC-PLC Evaluation Kit M02D2 RTK0EE0009D02001BJ
2.
HOW TO USE
This chapter describes how to use AC-PLC board and Filter board. For descriptions of the connectors, SWs and JPs
parts of each board, refer to Chapter 3 Interface specifications and SW/JP switching.
2.1
Selecting the Filter board
For this product, the Filter board for RX-BPF must be replaced according to the applicable standards. The Filter board
has the following specifications.
・A2-type Filter Board: CENELEC-A band (30k-90kHz)
・F2-type Filter board: FCC band (150k-500kHz)
・G2-type Filter board: Global band (35k-500kHz)
Insertion loss at center
Band Order
frequency[dB]
A2
4
-4.4
Insertion loss at center
Band Order
frequency[dB]
F2
4
-3.3
R30UZ0165EJ0100 Rev.1.00
July 01, 2021
f
frequency[kHz]
f
frequency[kHz]
-3dB
-6dB
Low range High range Low range High range
37.6
87.5
32.0
99.9
Figure 2-1 A2-type Filter board for CENELEC-A band
f
frequency[kHz]
f
frequency[kHz]
-3dB
-6dB
Low range High range Low range High range
113.1
499.8
93.2
Figure 2-2 F2-type Filter board for FCC band
588.9
3．Interface Specifications
Page 22 of 53
Advertisement
Table of Contents
