Filter Board; Explanation Of Connectors And Jp Of Filter Board - Renesas CPX4 AC-PLC User Manual

CPX4 AC-PLC Evaluation Kit M02D2 RTK0EE0009D02001BJ
3.3

Filter Board

This section describes the interface specifications and JP sets of the Filter board for RX-BPF.

3.3.1 Explanation of Connectors and JP of Filter Board

Figure 3-4 is the placement of connectors and JP, and the applications are shown in Table 3-20.
Connector, JP name
JP201
CN201
CN202
CN203
R30UZ0165EJ0100 Rev.1.00
July 01, 2021
Figure 3-4 Connectors and JP for Filter Board
Table 3-20 Usages of Connectors and JP for Filter Board
Selects whether to insert a low-pass noise suppressing filter (20kHz or less) on F2-type filter
board.
Short if used. Open if not used (factory default)
AC-PLC board-connection connector for A2-type Filter board
AC-PLC board-connection connector for F2-type Filter board
AC-PLC board-connection connector for G2-type Filter board
3．Interface Specifications
Use
Page 38 of 53