Johnson Controls SABROE UniSAB III Engineering Manual page 5

Whenever the emergency stop is activated during operation, the alarm text Compr. motor error will ap-
pear in the display. Before the compressor can be restarted, deactivate the alarm by means of the
/RESET key and release the emergency stop.
Note: If UniSAB III is set at Remote or Auto, the compressor will restart automatically.
Power supply
Consumption
Main supply terminals
Ambient temperature
Humidity
Tightness
Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
Technical data
Nominal VAC
85-250
32 VA
2.5 mm 2 rated cross section
0-55°C (during operation)
10-90% relative humidity (not condensing)
IP 54
5/346
F4
Hz
47-63