Table of Contents
Advertisement
Quick Links
CMS-1655
Central Monitoring Station
Installation Guide
Application
These installation instructions guide the installer through the installation of the CMS-1655 Central Monitoring Station.
Please read these instructions thoroughly before beginning installation.
North American Emissions Compliance
United States
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area may cause harmful interference, in which case users will be required to correct the interference at their own expense.
Canada
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Risk of Property Damage.
Ensure that the power source conforms to the requirements of the equipment. Failure to use a correct power source may result in
permanent damage to the equipment.
Risque de dégâts matériels.
S'assurer que la source d'alimentation électrique est conforme aux spécifications de l'équipement. L'utilisation d'une source
d'alimentation électrique inappropriée risque d'endommager irrémédiablement l'équipement.
IMPORTANT: The CMS-1655 Central Monitoring Station must be wired to 24 VAC only. Wiring the unit to 110 VAC will cause serious
damange and void the warranty.
Software terms
Use of the software that is in (or constitutes) this product or access to the cloud or hosted services applicable to this product, if any,
is subject to applicable terms set forth at www.johnsoncontrols.com/techterms. Your use of this product constitutes an agreement to
such terms. If you do not agree to be bound by such terms, you may return the unused product to your place of purchase.
Product warranty
This product is covered by a limited warranty, details of which can be found at www.johnsoncontrols.com/buildingswarranty.
Patents
Patents:
http://jcipat.com
1
LIT-12013121
July 2019
Advertisement
Table of Contents
Related Manuals for Johnson Controls CMS-1655
Summary of Contents for Johnson Controls CMS-1655
- Page 1 S’assurer que la source d’alimentation électrique est conforme aux spécifications de l’équipement. L’utilisation d’une source d’alimentation électrique inappropriée risque d’endommager irrémédiablement l’équipement. IMPORTANT: The CMS-1655 Central Monitoring Station must be wired to 24 VAC only. Wiring the unit to 110 VAC will cause serious damange and void the warranty.
-
Page 2: Table Of Contents
Selecting Display Brightness ..............................14 Setting System Time and Date ............................. 14 Diagnostics ..................................15 Resetting the CMS-1655 ..............................15 User Menu Flow Diagram................................16 Due to continuous improvement, Johnson Controls reserves the right to change product specifications without notice. LIT-12013121... - Page 3 Mounting Dimensions (flush thin mount)...……………………..……………………………………………………………… 5”W x 8”H x ¾”D Environmental Operating Temperature..…………………………………………………………………………………………………………… 32° to 125° F Operating Operating Humidity ..…………………………………………………………………………………..…… 10% - 95% RH, Non-condensing Due to continuous improvement, Johnson Controls reserves the right to change product specifications without notice. LIT-12013121...
-
Page 4: Installation Guide
CMS-1655 monitoring the parameters of multiple FMS-1655s and HMS-1655s. • Expanded visibility of a monitored 1. The CMS-1655 flush thin mount model station, allowing all six of its analog should be mounted in a location that The user may set up multiple passwords... -
Page 5: Mounting Procedure: Surface Mount
4. There are two primary options for installing the CMS-1655 surface mount Fig 3. Old Work Low-voltage Box/Bracket Due to continuous improvement, Johnson Controls reserves the right to change product specifications without notice. LIT-12013121... -
Page 6: Quick Start Guide
If the FMS or HMS stations that are monitored by the CMS-1655 reside on a network with a time server, then the time and date will Fig 4. Action Icons automatically be synchronized by the CMS-1655 through one of the units. -
Page 7: Specifying Network Address(Es)
Display Setup >> prompted to enter a minimum of four and Set Brightness. Fig 7. Quad Monitor Setup up to eight digits (see Figure 11). Due to continuous improvement, Johnson Controls reserves the right to change product specifications without notice. LIT-12013121... - Page 8 This ensures that the time and date are accurate on the CMS-1655 main display. Configuring Display Module Settings Options Dipswitch (S1) – internal use only 1.
-
Page 9: Wiring The Cms-1655 To The Nearest Fms-1655 Or Hms-1655 Controller
CMS-1655 Wiring the CMS-1655 to the nearest FMS-1655 or HMS-1655 Controller Daisy chain together the SUB_NETs on the backplanes of all the FMS-1655 and/or HMS-1655 units that will be monitored by the CMS-1655. Connect the CMS-1655 to the SUB_NET and AUX_PWR terminals on the backplane... -
Page 10: Programming Guide
All of the configuration screens that The CMS-1655 can simultaneously screen to quickly exit the menu system allow the settings of the CMS-1655 to display in real-time up to four monitored and return to the main display. be configured for a specific application... -
Page 11: Configuring Monitor Settings
View presents the view shown below in for configuring the subnetwork address Figure 18, with no numeric values, and for the CMS-1655. The Audible Alert Fig. 15 Select Monitor Mode only background color to indicate the units option provides support for configuring the current status. -
Page 12: Configuring Audible Alert Settings
CMS-1655 Configuring Audible Alert Settings volatile memory of the CMS-1655, a system security password management The Audible Alert option on the Unit Setup facility has been incorporated with a menu provides support for configuring capacity of ten unique passwords. The... -
Page 13: Managing System Security Passwords
Fig. 25 Password Setup When Auto Clean mode at a monitored FMS-1655 is enabled, the CMS-1655 indicates the status by a cyan background and a simulated fan as the action icon. The Safety Halo™ status indicator, if enabled, will flash slowly in cyan to indicate the Auto Clean mode. -
Page 14: Deleting An Existing Password
CMS-1655. This includes and year automatically while entering the parameters or stations being monitored configuring the Safety Halo™ settings, date. -
Page 15: Diagnostics
Figure 32, informing the user that the CMS-1655 will be reset when the OK button is tapped to confirm the request. Fig. 30 Entering in the Date Due to continuous improvement, Johnson Controls reserves the right to change product specifications without notice. LIT-12013121... -
Page 16: User Menu Flow Diagram
Due to continuous improvement, Johnson Controls reserves the right to change product specifications without notice. All other marks herein are the marks of their respective owners. © Copyright 2019 Johnson Controls. All rights reserved. Any unauthorized use or copying is strictly prohibited. www.johnsoncontrols.com...
Need help?
Do you have a question about the CMS-1655 and is the answer not in the manual?
Questions and answers