Johnson Controls SABROE UniSAB III Engineering Manual page 296

You may choose to import just one file, e.g. the Configuration.xml file, up to five files, or no files at all de-
pending on the settings you want to perform.
You can import files previously downloaded from UniSAB III to a drive position, as described under
Download settings from UniSAB III.
When the file(s) have been imported into U Set, the file contents will be displayed in the respective U
Set tables where the values can be reviewed, modified and printed.
The U Set tables are divided into the following tables:
• Configuration
• Analogue/regulator settings
• Calibration
• Timers
• E-mail
UniSAB III (boot) and communication set-up
Engineering manual - UniSAB III 1.10.8
296/346 001930 en 2021.06