Table of Contents
Advertisement
Starter Switch
The Starter switch starts and stops the engine.
There are three positions in the starter switch:
•
OFF: All the electric systems and the engine
are switched off, and the key can be remo-
ved.
•
ON: Engine is on Run mode. Charging circuit
and lamp circuit are energized.
•
Start: The engine cranks. Make sure to allow
the switch to ON position until the engine is
started.
Figure 5-2:Starter Switch
1 Off position
30
2 On position
15
50 a
Operation Controls
Start position to supply power
to the instruments and controls
Hold position
Starter motor activation.
Speed selector
The Speed selector regulates the speed of the
engine. In the ON LED Left position, the engine
idles and in the ON LED Right position the
engine runs at full speed.
Figure 5-3:Speed selector
A
Work/Transport mode
st
The 1
number button is used for work or transport
mode selection. Press the button to turn on the
work mode with Red illumination in button and
press again to turn On the transport mode.
Figure 5-4: Vibration On/Off Switch
A
Work/Transport mode
A
Speed selector
27
Advertisement
Table of Contents
