Parameters; Hot Keys; Assigning Hot Keys - Eventide Eclipse User Manual

Factory programs ship with their most salient parameters "linked" to the
doing some "light tweaking," stick to the
at all.
The area gets you "inside" a program, so to speak. In it, you can change the underlying algo-
PARAMETER
rithms loaded into the effects blocks, the routing between the effects blocks, or the parameters of the un-
derlying algorithms themselves.
Programs 100 through 199 comprise the Eclipse's set of "algorithms"
the separately provided "Eclipse Algorithms" document for details)
are "tweaks" and combinations of these elemental algorithms. Press the
key to see what algorithm or algorithms a given program is
PARAMETER
"built" on. To the right, we see that the
running on effects block A (
is running on effects block B (
rithm is running on
FXB
parameters. However, as we've said before, the
to a program's most important parameters.
All of the changes that you make in the
gram in the
PROGRAM
OK, the Eclipse has a cute little screen and sometimes you have to dig to get to the parameter you want to
adjust. That can be a drag, especially if the parameter is one that you access often. The
created to improve this situation. Here's the idea - pick a program parameter that you want to access quickly
and assign it to the

HOT KEYS

access that parameter
(you can still dig if you want to, however, the parameter will always exist in its original position)
any program parameter in the Eclipse to a hot key, and the factory presets ship with their most vital parame-
ters linked to hot keys.
You can view
HOT KEYS
you can select
4 Param
shown to the right.
Up to eight hot keys can be assigned for a given program, and the assign-
ments will be saved or updated with the currently loaded program. When
you load a new program, the assignments saved with the new program will
populate the
HOT KEYS
program-specific parameters (such as
to "global" parameters (such as

Assigning Hot Keys

Let's assign a hot key to
page of the area by pressing the
LEVELS
Next, press and hold the
Release 2.500
Eclipse User Manual
HOT KEYS
. Programs 200 through 499
fm modfilter/pan
FXA ), and that the
FXB ). Because the
, you would press
<EDIT FXB>
HOT KEYS
area. Well, almost all –
area. Then next time instead of digging, you just go to the
in the standard 1 Param
eter mode under
SETUP MODES (DISPMODE)
area; it doesn't matter if the assignments are to
PARAMETER
SETUP DISPLAY (BRIGHT)
{IN GAIN} in the
LEVELS
LEVELS
soft key.
{IN GAIN}
Page 33 of 64

Parameters

area - you need not venture into the
algorithm is
dual modfilters algorithm
dual modfilters
to access all of its
area will "link"
HOT KEYS
or areas are saved and loaded with a pro-
PARAMETER
see Bypassing Effects Blocks on page 39
Hot Keys
eter per page mode or
page 2
(ROUTING)
).
area. Get to the first
key.
area. So, if you're only
HOT KEYS
PARAMETER
(see
algo-
.
HOT KEYS
HOT KEYS
. You can assign
as
) or
Eclipse User Manual
area
area was
area to