Tempo-Controlled Parameters: T_Delay, T_Rate, Etc; Tutorial 1: Loading A Program, Setting The Tempo, And Assigning Modulation - Eventide Eclipse User Manual

MIDI Clock Set
SETUP TEMPO (TAP SRC)
tempo from a MIDI sequencer connected to the Eclipse's
MIDI input.
Externals
Set SETUP TEMPO (TAP SRC)
ber between 1 and 8) to control the tempo from external
controller inputs.
See page 43 for more information about Externals.
When you save or update a program, the current tempo is saved along with
it. This saved tempo will replace the current tempo the next time the program
is loaded.
You can disable the tempo by setting
Additional explanations and diagrams can be found on page 17. We highly recommend checking them out!

Tempo-Controlled Parameters: T_DELAY, T_RATE, etc.

You'll notice many parameters with "
names. These parameters synchronize to the tempo. For example, to the
right we see (T_RATE)
depicted will oscillate once every
If you want the chorus to ignore the tempo, set
the unadorned (RATE)
If you want every parameter in the Eclipse to ignore the tempo, set
TEMPO (TAP SRC) to
See page 35 for a more in-depth discussion of "T_" parameters. See page 17 for a diagram of the tempo and
its relation to "T_" parameters.

Tutorial 1: Loading a Program, Setting the Tempo, and Assigning Modulation

OK, we're going to run you through "a day in the life of your Eclipse"!
First, turn it on.
We want to load a program, and that's the sort of thing that happens in the
" area." So, press the
PROGRAM
The Eclipse sorts its programs so that the type of program you want to
load is easily found. Press
the display reads Number
until the display reads
Source (this will allow us to search for a program based on the type of
instrument the program was designed for)
a level.
see page 28 for more information
Press the and
< >
Programs-Guitar . Now you can access programs that were designed to
process guitars. Use the knob to select the program
Load the program by pressing the conspicuously labeled
You're whisked away to the
Too much distortion? Select the
Eclipse User Manual
Eclipse User Manual
SETUP TEMPO (TAP SRC)
" stuck onto the beginning of their
T_
. Its values are rhythmic, and right now the chorus
.
1/2 note
soft key to enter in a rate.
Off .
key!
PROGRAM
CRITERIA (SORT BY)
. Then press (SEARCH B)
. Press the
PROGRAM
keys until the left side of the screen reads
< >
area...
HOT KEYS
soft key and use the knob to
(FUZZ)
Page 16 of 64
to to control the
Midiclock
to ext x (where x is a num-
to Off
to and use
(T_RATE) off
SETUP
and turn the knob until
and turn the knob
key again to jump "up"
FuzzADSRPreamp
soft key.
<LOAD>
.
.
Release 2.500